The solder blob needs to be carefully removed before installation. new lasers come with a Solder blob to protect against static during shipment. ![]() Cleaning the lens with Alcohol will haze the lens over and do the same thing. See if your laser lens is melted and beyond repair. You may be lucky and find the lens is costed with something you can clean off. you can look at the lens with a magnifying glass or Jewellers loupe to see up close. The focusing coils heat up from focusing so much and the heat builds up so much that the lens and its mount melt. This happens when the Console is left on overnight and reading a Cd or DVD and the disc is dirty. You have to open the dvd drive, there are a number of tiny screws on the top of the drive, undo them all, and it can be opened, good luck! ![]() You will have to open your ps2, clean all the inner parts of it, and remove all the polish off them, (the dvd drive), particularly the centre, O ring disk (the white circle in the centre of the drive, which is only visible till you open the drive) Its because you plosh your discs, and the inside parts of the dvd drive have become lubricated. If you do they will charge you enough money to buy a new one, you have a better option change the Laser head your self. ![]() Click to expand.What happen with your PS2 is the Laser head is gone
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |